Our house

CONGRATULATIONS!!!  YOU'VE GOT IT!!!


See you in class

Some commentaries

There is only one person who has to retake the written exam (DRJ). Next day (Monday) he will take the exam again. It will be very similar to the one already taken.

The final marks are no ready yet since you haven't finished the video. There are four people in risk of not passing the subject if they don't record the video. (DGG, SRRA, RPP, DRJ). The rest have got a very low mark (nobody has got more than 6 points), so.. PLEASE RECORD THE VIDEO AND SEND ME IT ASAP*!!!!

*ASAP= as soon as possible

Don't panic!!!

See you in class 

Making of a house

OUR PROJECT

The class of Draughtsmanship (1st year) has decided to make a project about the construction of a house to put in practice the acquired knowledge in our course.

We made a brainstorm to decide how we were going to work and what kind of house we were going to do.

1ST DAY

First of all we surfed in the net to have many ideas. Some of us found many kinds of classic houses and others found modern ones. 

Finally we decided to make a mix of styles and began to make an outline.

2nd DAY

Once we approved the outline, we made a sketch and thought in the activities we had to do.

- Chosen materials 

- Budget

- Deadlines

- Design

- Rolls

- Activities

3rd DAY 

We finished the final design and draw it with AutoCAD to choose the scale and dimensions.

According to the scale we thought in the dimensions of the materials to buy them.

We decided who was going to buy some materials (cardboard) to make the structure, and phoned to some specialized shops to ask for many prices.

We got some cardboard from the drawing class at the high school.

4th DAY

We made the final design in 3D whit the pc game “The Sims 3”.

Once we began to cut the cardboard with the initial dimensions, we realized it would be better to enlarge 5cm the dimensions of the house.

Many of us were drawing the plans on the material to be cut.

After having drawn the plans, we cut carefully the cardboard with cutters.

We decided to modify the second floor to manage a better assembly. It will be supported by the walls made of cardboard.

5th DAY

We have finished cutting all the parts of the house: walls, floors, front wall.

We have been thinking about how to make stairs: an inclined structure (ramp) or an original designer stairs (with no structure or ramp).

We have been planning where we are going to place windows and doors (inside doors and principal one). 

We have made a colour taste on the material to proof the effect and behaviour of the cardboard.

6th DAY

We have calculated the stairs: treads, risers, steps, width, parapet…

We have been thinking how we are going to dimension the bathroom, and the situation of the furniture. We have decided we are going to install a shower place instead a bath.

7th DAY

One of us has painted the steps in black with tempera picture.

We have cut the floor framing to fit the stairs into the shaft.

The parapet has been thought to be made with a transparent material as plastic or polyurethane.

We have begun to use the electric glue gun to check how it works, and we have put into it the special glue bar.

8th DAY

We have calculate the window openings, and they have been: 11,5x7 cm

We have cut the cardboard to install the frame windows.

We have begun to construct the house. First we have stuck two of the walls with melted glue.

Then we have stuck the front wall and a perpendicular one to the floor.

Finally we have stuck the third wall to the structure.

One of us has been designing the kitchen with the computer to make the different elements at home.

9th DAY

We have though and design the stringer of the second part of the stair, and we have cut the cardboard using a cutter.

We have stuck the steps and the landing in the wall with glue using the electrical glue gun.

Then we have stuck the rest of the steps over the stringer.

One of us has been building the kitchen furniture.

We have stuck the bedroom wall to the floor of the second floor with glue.

We have been deciding how we are going to install a parapet in the flat roof: with an enter piece of cardboard or many pieces, with different points of sticking.

10th DAY

One of us has painted the string piece with black tempera and a thin paintbrush.

We have installed the steps over the string piece with glue, using the electrical glue gun. It has been very complicated because we have had to consider the inclination of the string piece and the steps´ one to fit into the stair landing.

One of us has finished the kitchen furniture design in AutoCad 3D and has begun to make it.

We have noticed a small mistake in a joint and we have decided to solve it with a thin piece of cardboard to fill the gap left between the walls of the second floor.

We have been deciding how we are going to make the living room furniture: colours according to the rest of the decoration, materials, shapes and textures, designs...and who are going to make them. After looking at all the options to decorating the house, we have considered the black colour.

We have finally decided the design of the chairs. They will be made of cardboard and painted in red and black.

Other of us has been thinking about the bathroom design.

11TH DAY

One of us has made the kitchen: furniture, cupboard, fridge, sink, oven, washing machine and cooker using plywood recovered with Eva foam. The sink has been made with a part of an ice cube cooler and grey acrylic painter. The extractor hood has been made of American slide tape. All the kitchen walls and the floor have been recovered with painted paper simulating decorated tiles. A kitchen clock has been installed over the fridge.

Another of us has been designing the furniture bathroom with AutoCad using the scale 1:14.

We have decided the design and colour of the chairs. They will be painted in redJ.

We have been cutting the cardboard to make the chairs and the living room table, using glue.

One of us has made a television with painted cardboard.

12th DAY

Some of us have decided to change the original design to enlarge the first floor area. We have noticed the space was very small to include the kitchen area and the living room.

So we have included many extra cubic metres with cardboard to relocate the kitchen furniture.

One of us has been thinking about the parapet: material, dimensions, design...

Another of us has been looking for a chequered floor design into the internet, and he has printed it with the plotter. Then he has cut it according to the new extra floor and has been glued to the subfloor with stick bar.

The furniture bedroom has been made with cardboard and glue.

The bed has been made with cardboard, as its legs. The wardrobe has been made of cardboard too, and will be painted in red.

The living room chairs have been painted in red.

13th DAY

We have recollected all the photos we have been taken during the project. Two of us have been taken them with their personal mobiles and have shared them in Dropbox.

We have bought many materials to make the garden and the green zone on the roof.

We have used a special green textile: felt, to simulate the grass. And it has been fixed to the cardboard with glue. At first we thought in staples, using a stapler, but it wasn’t a good idea.

As we have decided, the first floor area has been enlarged, and many of us have been working on it, fixing an extra piece of cardboard to the original one and relocating the kitchen. They have had to cut the wall we have had fixed some days ago, but the result has been worth the effort!

Some of us have been making the parapet with rectangular pieces of cardboard that have been cut with the cutter. They have been stuck with glue using the electrical glue gun and rectangular pieces of plastic to simulate a glass protector.

14th DAY

We have been discussing about the swimming pool construction. Many of us were for the pool, and some of us have thought in an inclined roof solution. Finally we will have an amazing poolJ!!

We have been making the pool with cardboard and we will be simulating the water with blue felt. The parapet has been cut to make the access to the pool, and a parapet will be made to protect the pool area.

The bathroom furniture has been done with cardboard and glue and the design has been taken from the net.

15th DAY

We have decided to install many hammocks, and we have constructed them with cardboard.

One of us has been sticking the parts of the bathroom furniture with the glue bar.

The rest of us have been finishing the kitchen details as cupboards, clock, hood...

Once again we have changed the roof design. There will be a top light (tragaluz) above the swimming pool.

16th DAY

The last day!

We have finished the swimming pool construction. It has been fixed to the roof and a piece of green felt has simulated a green area to relax.

The pool area parapet has been finished in cardboard and glue, and the rest of relax elements (sunshade, hammock) have been finished.

The bathroom has been finished too. The floor has been printed and glued to the subfloor with stick bar, and the washbasin, the toilet, the shower have been finished.

The living room furniture has been completed with another sofa.

The curtains of all the windows have been designed in orange and yellow felt (yellow on the subfloor and orange in the first floor).

We have been taking care of every detail (Insulating tape to finish off windows frames, installing the plasma TV, ...).

To finish our project we have closed the second floor with an inclined roof framing, made of brown cardboard that we have recover with a decorated paper to simulate a tile roof.

Characteristics of the project:

-Scale E 1:14

Dimensions:

-Door: 2.10m x 0.91m (15 x 6.5 cm)

-Windows

-Second floor (11,5x7cm)

-First floor 4.6 x 9 cm

- Ceiling height: 2.70 m (19.28 cm)

-Steps: 0.16 x 0.28 m (1.19 x 2 cm)

-Kitchen:

-Fridge 0.60 x 2.20

-Cupboard 1: 0.60 x 0.70

-Cupboard 2:0.30 x (90/70/45)

Furniture drawer: 14cm/28cm

-Sink: 80x40

-Cook top/cooker: 60x60

-Oven: 60x50

-Bedroom

-Bed: 9.2 x 12.7cm

-

Materials:

- Cardboard

- Tempera

- electrical glue gun

- Special glue bar

- Cutter

- Scissors

- Square

- Triangle

- Ruler

- Rubber

- Pen

- Propelling pencil

- Pencil

- Brush 

- Stapler

- American slide tape

- Plywood

- Eva foam

- Felt

- Plastic

VOCABULARY
ENGLISH	SPANISH
Outline	Boceto
Budget	Presupuesto
Deadlines	Plazos, fecha límite
Dimensions	Dimensiones
Design	Diseño
Rolls	Roles, papeles
Scale	Escala
Assembly	Ensamblaje
Walls	Muros, paredes
Floors	Suelos, plantas
Front wall	Pared frontal
Designer stairs	Escaleras de diseño
Inclined structure	Estructura inclinada
Ramp	Rampa
Stairs	Escaleras
String piece	Zanca de escalera
Stair landing	Desembarco de la escalera
Window	Ventana
Frame	Marco
Behaviour	Comportamiento
Ceiling height	Altura de techo
Steps	Peldaños
Stairs width	Ámbito/ancho ( de la escalera)
Framing height	Altura de forjado
Floor framing	Forjado
Roof framing	Cubierta
Flat roof	Azotea
Top light (window)	Tragaluz
Tread	Tabica
Riser	Huella
Landing	Meseta/rellano de escalera
Banister	Barandilla/parapeto
Parapet	Balaustre
Shaft	Hueco (de la escalera)
Kitchen	Cocina
Fridge	Nevera
Sink	Fregadero
Oven	Horno
Cook top/cooker	Vitrocerámica/cocina de gas
Extractor hood	Campana estractora
Cupboard	Muebles de cocina
Wardrobe	Armario guardarropa
Chequered floor	Suelo de damero
Washbasin	Lavabo (fregamanos)
Toilet	Inodoro
Drawer	Cajones
Tempera/poster paint	Témpera
Cardboard	Cartón pluma
Electrical glue gun	Pistol a de pegamento
Special glue bar	Barra de pegamento/pegamento en barra
Eva  foam	Goma Eva
Felt	Fieltro (tela)
Plywood	Contrachapado
American slide tape	Cinta americana
Insulating tape	Cinta aislante
Ice Cube Cooler	Cubitera
Tile	Baldosa
Cutter	Cúter
Scissors	Tijeras
Stapler	Grapadora
staples	Grapas
Square	Escuadra
Triangle	Cartabón
Triangular scaler	Escalímetro
Ruler	Regla
Rubber	Goma de borrar
Pen	Lápiz
Propelling pencil	Portaminas
Pencil	Bolígrafo
Brush	Pincel
Computer	Ordenador de mesa
To stick	Pegar, juntar
To be worth	Merecer la pena
Hammock	Hamaca
Sunshade	Sombrilla